Before we start here's some things to note
Are you using the older PayClip device? If so, head to this article.
Do I need to be on a specific plan?
You will need the CONTROL add-on to run Eftpos integration.
Our Control add-on not only provides you the ability to connect your Eftpos terminal to posBoss it also gives you a number of extra benefits such as Recipe Builder, Stock Control & Staff Tracking. All for only $20 + gst a month.
Will I need to make changes to my router or network?
Please Note: The new PayClip currently needs a Wi-Fi signal from a router & doesn't work using bluetooth like the old version. Please reach out to BNZ if you need to discuss your hardware/network requirements.
We highly recommend having a dedicated network and a router with a strong signal, solely for posBoss and the BNZ PayClip device. Other devices (from phones to streaming cameras) joining your network can cause communication issues.
Getting Set Up
1. Set up the BNZ PayClip terminal to talk to posBoss
First of all, you will need to have your BNZ PayClip set up and ready to take payments. Here are the instructions from BNZ.
Once you’re sorted with the above, then there’s just a few steps to get your transactions to come through automatically
2. Set up a static IP address for your PayClip and note your IP address
Follow this process to ensure the best stability for your BNZ PayClip & posBoss.
3. Select your eftpos supplier on the posBoss Management site
Select your provider in Setup > iPad Setup on your Management site.
Here you will see the Eftpos Integration selector. Click inside the button where it says None then select your provider. - BNZ PayClip
Click Save then make sure you press sync menu in posBoss app on your iPad as detailed in step 4 below...
4. Sync iPad and connect
In the posBoss iPad till app go to: Settings > Press Sync Menu.
After syncing is finished, fully close and restart the posBoss iPad till app (press the iPad’s home button twice, and swipe up on posBoss to close).
Open the posBoss iPad till app again, then: Settings > Eftpos > Connect
Locate the IP address from your PayClip and enter that IP address into the field at the top called Terminal IP Address, replacing any default digits.
5. Press the Continue button and if all is set up correctly, you will receive a success message. Close out of the window and you should be good to go. Try a card payment on posBoss as a test and the BNZ PayClip should come to life, awaiting the tap.
How to Disconnect the BNZ PayClip or run a settlement enquiry?
Check out our Admin functions article below...