Let's get set up with BNZ Payclip!

BNZ PayClip integration means that you are using posBoss instead of BNZ PayClip App for payments. 

BNZ documentation that refers to your "smartphone" - think "iPad" and the "PayClip App" - think "posBoss". 

Here's a link to the PayClip User Guides:

Before we start here's some things to note

Do I need to be on a specific plan?

You will need the CONTROL add-on.
Our Control add-on not only provides you the ability to connect your Eftpos terminal to posBoss it also gives you a number of extra benefits such as Recipe Builder, Stock Control & Staff Tracking. All for only $20 a month. 

Head to Settings > posBoss Settings > Subscription to activate and get connected. 

Add BNZ Payclip to your Control settings

Once you have Control, head to Settings > posBoss Settings > Control and select your Eftpos Integration provider.

posBoss Eftpos Integration - Select Eftpos Partner

Click Save and you're done here! Now...

  1. In the posBoss till app go to: Settings > Press Sync Menu.
  2. After syncing is finished, fully close and restart the posBoss till app (press the iPad’s home button twice, and swipe up on posBoss to close). The Eftpos button should now be available under Settings

Pairing your PayClip with the iPad via Bluetooth 

The process below is taken from BNZ's PayClip user guides. Please refer any issues pairing the device to your iPad through to BNZ Support on 0800 729 254 

  1. Switch on your PayClip. You will see a battery icon, Bluetooth® indicator and BNZlogo on the screen when your PayClip is ready. 
  2. Ensure your Bluetooth® is turned on via settings in your iPad.
  3. Hold down the ‘green tick’ button on your PayClip for five seconds until theBluetooth® symbol starts flashing. 
  4. Find PayClip listed under ‘Devices’ on your iPad and tap to select 
  5. A popup message will appear with a code. Press ‘Pair’. 
  6. The same code should now appear on your PayClip. Press the ‘green tick’ button on your PayClip.
  7. Check that the PayClip listed on your iPad bluetooth settings now shows as ‘Connected’.

First Time Login using posBoss

In the posBoss iPad Till App, press the Settings icon at the top right of the main screen, then press Eftpos.

Here you should see The connection window for BNZ. If you don't, get in touch with posBoss support.

Press Connect

posBoss - Connect to BNZ PayClip

Enter in your Username and PIN provided to you by BNZ.

posBoss Eftpos Login

Enter in your Terminal Activation Code - sent to you via text from BNZ when you set up.

posBoss - Enter Terminal Activation Code for BNZ PayClip

You'll then be asked to set a new PIN and confirm. Press Continue once entered.

posBoss - Create 6 Digit Pin for BNZ PayClip

If all is successful you will see the following screen. Press Retry if you don't see this screen the first time.

posBoss successfully connected to BNZ PayClip

posbosshq.com

Did this answer your question?