Once you're all set up and logged in to the PayClip settings on posBoss (under Settings > Eftpos on the posBoss iPad till app), press the settings icon at the top right of the Terminal Status window to access the Admin Functions:

posBoss Eftpos Admin Functions

Let's look at the options:

posBoss - BNZ PayClip Admin Functions

Enable Contactless Payment

Here you can enable or disable the contactless payment functionality (otherwise known as paywave or tap & go). Contactless payment will be disabled to begin. Simply press the button to enable, press again to disable. Boom!

Enable Signature Verification

Use this to enable or disable signature verification for payments requiring a signature. When verification is enabled, a 4-digit manager PIN is required to process the payment after the signature is entered.

To Enable, press the Enable Signature Verification button, enter a 4-digit manager pin and press Enable

To Disable, simply press the Disable Signature Verification button.

Check for Terminal Updates

Terminal updates - updates of the BNZ PayClip software can be manually checked for and managed here. We recommend a daily check first thing in the morning.
To check, press the Check for Terminal Updates button. If this is your first time logging on, make sure you do this now as the initial update can take a while.

Press Continue on the pop-up window.

Update BNZ PayClip terminal on posBoss

If an update is available the next screen appears. Press Update Now and the process will begin. This can take a minute or so to complete.

Update BNZ PayClip on posBoss Now

Once complete, you will receive an Update Completed message.

Disconnect Terminal

Pressing this button immediately disconnects the BNZ PayClip from posBoss so no integration occurs. To re-integrate, hit the connect button and go through the login process.

posbosshq.com

Did this answer your question?